Browse Products


Healthcare

Module Design

At the heart of the each module is a self supporting frame manufactured from strong 16 gauge galvanised steel – not just a flimsy structure. It is fully adjustable for height, plumb and level.
 
All modules are produced to specification, including project specific sanitaryware and brassware to meet the requirements of HTM 64 for the application the units are designated for. Panels are manufactured as standard from impact resistant, sanitized antibacterial compact grade laminate for optimum hygiene, allowing appropriate cleaning chemicals and water to be used without affecting the life of the material.
 
Each module is then tested and identified. Vulnerable sanitaryware is removed and boxed for protection, ready for simply refitting during installation.
 
Install and Connect
The factory assembled modules, which now include the self supporting frame, plumbing, sanitaryware, brassware, supply and soil connections and all fixings, are then delivered to site instructions – ready to connect to pre-installed site water supplies and services. Cubicle Systems provide site preparation
drawings as part of the service, ensuring a smooth installation. Healthcare RangeHealthcare Washroom Cubicle Design
 
 
 
The result is a fully integrated solution for healthcare environments that not only complies with HTM 64, but is also rapid to install and commission, offering minimal disruption to clinical areas before, during and after installation.
 
Maintenance
The robust design of the module frames and panelling ensures a long service life. Maintenance is further simplified by an ingenious, yet simple design feature of the module access panels. A unique pivoting access panel allows fast and simple access to the duct for maintenance purposes. To prevent unauthorised access, the panels have a key operated lock, which can be suite passed for convenience.
 
Infection Control
Cubicle Systems Pre-plumbed Healthcare Modules offer a designed solution to infection control.
 
·         Sanitized antibacterial compact grade laminate panels
·         Abuse resistant and impervious to bacteria
·         Can be water saturated without harm
·         Cleaning chemicals do not affect surface
·         Close fitting panels to minimise edge surfaces
 
 
Construction
Cubicle Systems Pre-plumbed Modules are available in four standard configurations to suit the site specific requirements of any project, whether new build or refurbishment and repair. All share the same high quality construction. 
 
Key 
1 – Single part vertical return panel – eliminates need for metal trim
2 – Steel wall fixing channel
3 – Pivoting and lockable access panels
4 – Robust 16 gauge self supporting steel frame
5 – HTM64 compliant Twyford sanitaryware
6 – Steel floor fixing channel
 
Construction:
·         Robust, 16 gauge self supporting steel frame
·         Adjustable for height, plumb and level
·         Steel wall and floor fixing channels
·         Abuse resistant sanitized antibacterial compact grade laminate panels
·         AccessPlus™ pivoting and lockable access panels
·         Post formed compact grade laminate vertical panelling
·         Suitable for heavy use and wet environments
 
Sanitaryware & Brassware:
·         Standard modules use Twyford healthcare product range
·         Optional pre-plumbed accessories from Pland, Dart Valley Systems, Horne Engineering and Kohler Mira
·         Compliant with HTM 64 (where appropriate)
 
Options:
·         High pressure laminate panels (dry areas only)
·         Timber frames for complex refurbishment projects
 
Module Configurations
Boxed Out Module – Designed for installation projected from, but adjacent to solid or partition walls. All services are concealed and routed through the wall or alternatively the ceiling or floor.
 
Between Walls Module – Designed to create a duct wall system between remote walls. Ideally suited to multiple modules or assisted room facilities. All services are concealed and routed through the duct wall.
 
Corner Module – Designed for installation projected from the meeting point of adjacent solid or partition walls. All services are concealed and routed through the wall or alternatively the ceiling or floor.
 
Aperture Module – Designed for installation in projects where alcoves or apertures exist.